Tag: diy

Categories
code electronics work

Simple ATTiny85 USB board

IMG_20140623_121908_fixI needed to create a small, cheap USB-enabled circuit to serve as a key logger, and I’ve found some nice projects online that explain how to do this.
I found out you could use an ATTiny85 to run the V-USB software USB stack, and I only needed the one input pin to gather data (it’s going to be a USB “That was easy” button).
Since this was done so many times before, I will be brief, and try to point out problems I had instead of a regular tutorial.

Continue reading “Simple ATTiny85 USB board”
Categories
electronics Solutions

Hacking together a Kinect port

Hi,

Just a quicky on how I hacked together a DIY Microsoft Kinect port. The Kinect port is non standard, USB-like port, and to actually connect it to a PC you must buy an adapter from microsoft for >30$. This is whack. You should make your own. All you need is access to a lasercutter, vinylcutter, plexiglass 1/8″, some copper sheet and solder equip.

Continue reading “Hacking together a Kinect port”